Different Types Of Pallet Racking In Melbourne

Different Types Of Pallet Racking In Melbourne

with No Comments

Storage of materials can be cumbersome, but you can overcome this problem by using organizers like pallet racking. Using Pallet racking in Melbourne refers to some material hanging system of storage where different materials are stored on pallets in rows that are horizontal and have different levels. These racks require the help of forklift trucks in order to unload and load the pallets onto the racks. No matter what type of pallet racking you have, it will definitely increase the storage capacity of your retail centers, warehouse and any storing facility that you might have.  There are many companies dealing in pallet racking in Melbourne from where you can buy different types of racking system that will match your requirement.

 Selecting Pallet Racking:

 If you are looking for pallet racking in Melbourne, then there are certain things that you should keep in mind:

  1. Check the density-While you are selecting a pallet racking make sure it matches the density that you desire or require to stack your materials.
  2. Take the measurement of the warehouse or storage area- You should get a measurement of your building or floor space before you get to buy a pallet racking. The size of the pallet racking should be in accordance with the size of the available space.
  3. Do the inspection of your warehouse to remove any obstruction- You should also keep in mind that the place where you will keep the pallet racking will have obstructions such as doors, columns or support beams. Thus, you should buy a size that will be passed by these obstructions easily. This is why taking the measurement part is very important. If you take the wrong measurements and buy the wrong size of pallet racking, then your entire buy will go to waste.
  4. Weight of the inventory- You should also keep a check on the weight and size of the inventory and make sure that it is accessible.
  5. Compare the costing - The last thing that you have to keep in mind while purchasing pellet racking is that you should make sure that its cost fits your budget.

Types of Pallet Racking:

 There are various types of pallet racking available in the market. Some of them are discussed below:

  • Selective Pallet Rack: If you are looking for a less dense and cheap racking system, then you must go for selective pallet racking. This type of pallet racking comes in two main types of styles:

Structural

Roll formed.

Roll Formed: This type of pallet racking is quite light and has load beams that are horizontal and are attached to the beams with the help of bolts. The type is generally adjustable in two inch increments. This quality makes the process of adjusting the rack heights quite easy. However, roll formed racks cannot hold much weight in comparison to other types of pallet racking. It is also less resistant to the impact of forklifts.

  • Structural Selective Racking: This type of racking is quite durable because the beams of it are attached to the uptight beams with the help of bolts. This rack allows customization and is adjustable. It is less prone to damage than the roll formed pallet racking and is more durable.
  • Other types: The various other types of pallet racking in Melbourne are push-back, drive-in-drive-through and pallet flow rack. These types of racking allow more storage, but it cannot be accessed easily. It takes a bit of organization and planning in order to use these racks properly. But once you get used to it, these racks are the most beneficial.

Push-back racking – These are fabricated structural form. When the loaf is placed on the structure it pushes the pallet back. When unloading is done, the pallets are again pushed in the front.

Drive-in-Drive-through- If you are looking for a space saving and durable option for storage, then you must consider drive-in-drive-through racking system.  This is one of the most sought-after pallet racking in Melbourne. It allows the forklifts to move in the aisles easily and do its work.

The above-mentioned points highlight why pallet racking is important and what the types are. There are many companies dealing in pallet racking in Melbourne, but not every company will be able to provide you the right product. Here are some tips for choosing the right pallet racking:

  1. Check the experience of the company
  2. What are the different types of racking they have?
  3. Whether they have technical support
  4. Do they guarantee their product?

You can make the purchase from any reliable shop. However, before selecting the shop make sure you do a background check on the shop. You should also check the user reviews of the shop to know about the quality of their products. With the help of these pointers you will be able to find the right company for pallet racking in Melbourne.